What are the differences between system doors and

2022-07-22
  • Detail

What are the differences between system doors and windows and ordinary doors and windows? Today, facing the increasingly high standards of building energy conservation, more and more doors and windows do not meet the energy-saving requirements of current buildings.

What are the differences between system doors and windows and ordinary doors and windows

facing the increasingly high standards of building energy conservation, more and more doors and windows do not meet the energy-saving requirements of current buildings. Investigate the reasons, The reason is that the design and production of doors and windows adopt traditional technology, and such doors and windows are not system doors and windows. Therefore, it naturally does not meet the current standards of building energy conservation. There is no doubt that only good system doors and windows can meet higher standards of building energy efficiency. However, most people still don't understand the differences between system doors and windows and non system doors and windows. Today I will talk about the difference between system doors and windows and ordinary doors and windows in detail! I hope it can help you

most people think that when buying high-quality doors and windows, it is enough to pay attention to the quality of obvious parts of doors and windows, such as aluminum, glass, accessories, etc., but they don't understand some professional performance requirements of doors and windows at all. They pay more attention to factors such as product quality and cost performance. In the initial form of consumption consciousness, they think that high-quality doors and windows are equal to high-performance doors and windows

system doors and windows are a perfect organic combination of performance systems, which need to consider a series of important functions, such as water tightness, air tightness, wind pressure resistance, mechanical strength, heat insulation, sound insulation, anti-theft, sun shading, weather resistance, operating feel, and also consider the comprehensive results of the performance of equipment, profiles, accessories, glass, adhesives, seals, all of which are indispensable, and ultimately form high-performance system doors and windows

the five core features of the system doors and windows: systematic design, high insulation profiles, high standard materials, high-quality hardware system, rigorous and advanced production technology

the difference between the technical configuration of system doors and windows and ordinary doors and windows:

Europe is the birthplace of system doors and windows. Since the beginning of the development of modern architectural doors and windows industry in the early 1980s, it has experienced nearly 30 years of market baptism and evolution. Today, ordinary doors and windows with poor performance have always occupied the leading position in the Chinese market, the upgrading of Chinese door and window technology is relatively slow, and architectural doors and windows have become a major energy consumer of Chinese buildings

in recent years, the performance and quality of ordinary doors and windows have improved to a certain extent, but due to the restrictions of market distribution and price, ordinary doors and windows have not reached the configuration and performance of European system doors and windows. There are many kinds of door and window profiles, hardware, accessories, rubber strips, components, etc. there are dozens of kinds of materials for a complete door and window, and there is a lot of room for selection and reduction. This is also the reason why there is a large gap in the price of the same type of window

1. In terms of stability and performance,

the system doors and windows have their own independent technical department, which will carry out strict tests and inspections on the components of the system doors and windows, so the components are well matched and are not prone to failure, that is, we often say that the stability is good. Ordinary doors and windows are assembled by ordering different parts according to their own needs, but there will be some problems in the process of use, and the stability is relatively poor. After 2 to 3 years of research and development, the system has comprehensively tested the materials, the performance and quality of the whole door and window, and launched mature products after reaching the expected goals. Ordinary doors and windows are temporarily integrated door and window products for a single project, which are often not fully tested

2. In terms of flexibility,

all components of the system doors and windows have been fixed according to different performance, and the room for selection is relatively small compared with ordinary doors and windows, so the flexibility is small. Ordinary doors and windows can flexibly configure their own components according to their own needs. The system doors and windows are serialized and standardized products, and the notch structure, material supply, etc. have strong exclusivity and incompatibility. The series can only be selected according to the needs of the project, and generally will not be developed for separate projects. Ordinary door and window materials can be selected by domestic and foreign manufacturers, or can be temporarily opened, with strong flexibility

3. In terms of software, while providing products, the system doors and windows also provide design software, design manuals, procurement manuals, processing manuals, professional special equipment and technical service support, which is a complete industrial chain. The quality of ordinary doors and windows depends on the level of designers and the processing and installation ability of door and window enterprises

4. In terms of after-sales service,

the warranty period of system doors and windows is longer than that of ordinary doors and windows. In addition to the engineering quality assurance of door and window units, the quality assurance of system doors and windows also includes the warranty period of products of the system company. In addition, brand stores can carry out simple maintenance. Ordinary doors and windows are often sold without doors, and the owners do not know who to repair after the doors and windows fail

when choosing doors and windows, don't blindly seek low prices, but also depend on quality. Only good quality doors and windows are really good and cheap

Shandong Meigu door and window Technology Co., Ltd., a wholly-owned subsidiary of Jiangsu Xuzhou Meigu door and window Co., Ltd., is located in Shandong, known as the "Silicon Valley of doors and windows in China" Linqu China Europe energy saving door and window Industrial Park

megol has been focusing on doors and windows for 20 years, and its brand "Meishang" is committed to system safety doors and windows, with great dedication and accumulation

the company integrates R & D, production, production, testing, sales and service. Based on the market demand of modern doors and windows, combined with the latest fashion trends in the industry and the most advanced door and window technology, we strive to create solutions for high-end system safety doors and windows, and provide customers with energy-saving, efficient, simple and elegant cutting-edge products

great beauty in the surrounding area, and respect between opening and closing! "Meishang" doors and windows, the leader of the industry, is welcoming you to join and share with us with our excelsior technology, meticulous attitude, warm and open-minded mind, humble and grateful integrity

昆明外阴白斑医院

成都性病医院

郑州胎记疤痕医院

成都不孕不育医院

Copyright © 2011 JIN SHI